EasyManua.ls Logo

Takeuchi TCR50 - Page 55

Takeuchi TCR50
166 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
53
CONTROLS
Travel Speed Switch
Press this switch to set the travel speed
to 2nd speed (high speed). Press again to
return to 1st speed (low speed).
Light Switch
When this switch is turned while the starter
switch is at ON, the lights turn on as follows :
O .........Off
I ..........Front lights, rear light and meter light
turn on.
Switches
Wiper Switch
IMPORTANT: If no washer uid is
discharged, do not operate the washer.
Doing so may damage the pump.
IMPORTANT: Operating the wiper with no
moisture on the windshield will scratch
the glass. Apply water or washer fluid
when operating the wiper.
IMPORTANT: In cold seasons, the wiper
blade may freeze to the glass. Operating
the wiper forcibly may damage the wiper
motor.
O .............. Off
I ............... Wiper operates.
PUSH ....... Washer fluid is squirted from the
nozzle while pressed, and stops
when released.
S2B014
L3B028
L3B029
PUSH