75
OPERATION
Operating Procedures
Cautions on Use in Water
If you enter water at a sharp angle, the front
of the machine may be submerged, exposing
the radiator fan to water and damaging
them. Do not let the front of the machine get
submerged.
Allowable water depth
In water, only use the machine up to a
depth at which the water comes up to the
center part of the travel reduction gear
case.
When greasing places used under water
for long periods of time, apply enough
grease so that the old grease is expelled.
Never submerge the swing bearing or main
body in water or sand. If the slew bearing
or main body should get submerged,
contact a Takeuchi sales or service outlet
for inspection.
To Next Page
Loading...
Need help?
General