How to correct the top margin on Tally Dascom 1330 Printer?
To correct the top margin, first check the application's top margin setting. If needed, adjust the Top Margin setting in the printer's Page Setup menu.
How to load or feed paper into Tally Dascom 1330?
To properly load paper, make sure the paper select lever on the top right of the printer is set correctly. Move the lever to the front for single sheets or to the rear for continuous forms. Also, ensure that the paper covers the paper-out sensor.
How do I prevent my Tally Dascom 1330 from overprinting on the same line?
To stop the printer from overprinting on the same line, change the Auto CR setting in the System Setup menu to No.
How to prevent double spaced lines on Tally Dascom Printer?
To correct double spacing, change the Auto LF setting in the System Setup menu to No.
How to make the next print line start at the left margin on Tally Dascom 1330 Printer?
To ensure each print line starts at the left margin, change the Auto CR setting in the System Setup menu to Yes.
Instructions for positioning the printer on a stable surface for optimal operation and ventilation.
Identifies and describes the various parts and their functions within the printer unit.
Step-by-step guide for installing the ribbon cartridge into the printer.
Procedure for attaching the optional sheet feeder to the printer unit.
Guidance on connecting the printer to a computer using interface cables.
Instructions for connecting the printer to a power source and checking voltage.
Explanation of the printer's control panel buttons and status indicator lights.
Details on how to perform the printer's self-checking and startup procedure.
Instructions for cleaning the printer's exterior and interior to remove dust and particles.
Procedure for cleaning the printer's platen and paper bail rollers to ensure proper paper feed.
Solutions for problems related to print darkness, smearing, and incorrect characters.
Troubleshooting steps for paper loading errors, jams, and misalignments.
Solutions for power, printing, and paper select lever related operational problems.
Information on identifying and resolving critical printer failures and error indications.
Details on error codes displayed through LED status lights and buzzer sounds.
Overview of printer diagnostic features like Self-Test and Hex-Dump mode.
Procedure for updating the printer's firmware to resolve issues or add features.
General| Type | Dot Matrix Printer |
|---|---|
| Print Width | 80 columns |
| Paper Handling | Friction feed, Tractor feed |
| Resolution | 360 x 360 dpi |
| Print Speed | 300 characters per second |
| Connectivity | Parallel |
| Paper Size | A4, Letter |
| Noise Level | 55 dB |
| Number of Pins | 24 pins |
To Next Page
