Tally Dascom DL-200 - Connecting Serial Interface; Connecting Parallel Interface; Connecting Ethernet Interface

Tally Dascom DL-200 User Guide V1.3
22
2.7.2 Connecting serial interface
Be sure to turn off the power supply for both the printer and host computer before
connecting the cables.
2.7.3 Connecting parallel interface
2.7.4 Connecting Ethernet interface
• Before installation, make you have installed the driver and the driver for Ethernet
interface (see Installing Driver on page 17)
• When LAN cables are installed outdoors, make sure devices without proper surge