FOREWORD
Thank you for purchasing the Mini-Pour/Cloud Point Tester Model MPC-102A/102L from
Tanaka Scientific Limited.
This instruction manual provides necessary information for using the MPC-102A/102L.
Read this manual thoroughly before use and ensure that you have understood its
contents.
This manual employs the following precautionary notation. For your safety, ensure that
you understand these precautions and heed them at all times.
!
WARNING：・・・・・・・・・・
Warnings indicate a significant risk of death or serious
physical injury if the information is ignored.
!
CAUTION：・・・・・・・・・・
Cautions indicate a significant risk of physical injury or
property damage if the information is ignored.
USES
!
Warning: Use the product only to measure pour points and cloud
points as prescribed under ASTM D6749 "Standard Test
Method for Pour Point of Petroleum Products (Automatic
Air Pressure Method)" and ASTM D2500 "Standard Test
Method for Cloud Point of Petroleum Products".
The product has automated test processes corresponding to those prescribed in ASTM
D6749 "Standard Test Method for Pour Point of Petroleum Products (Automatic Air
Pressure Method)" and ASTM D2500 "Standard Test Method for Cloud Point of
Petroleum Products" for the purpose of obtaining pour points and cloud points only. This
product is not to be used for any other purpose.
To Next Page
Loading...
Need help?
General
