Tanaka MPC-102L - Maintenance and Post-sales Servicing; Periodic Maintenance

- 28 -
8. Maintenance and Post-sales Servicing
8.1. Periodic Maintenance
This instrument is fully inspected and calibrated prior to shipping, and should require no readjustment
immediately upon delivery.
To ensure high performance and maximum safety, however, the instrument needs to be maintained
and adjusted periodically. For more details on maintenance and recalibration techniques, refer to the
attached Maintenance Manual.
8.2. Consumables and Accessories
!
Caution: Use only Tanaka Scientific Limited genuine
consumables, parts and accessories or such parts as
recommended by Tanaka Scientific Limited.
For orders and inquiries about consumables, parts and accessories for this instrument, contact
Tanaka Scientific Limited or an authorized distributor. Contact details are provided with the product
warranty at the end of this manual.
When placing an order, be sure to quote the product model "MPC-102A" or “MPC-102L”.
The most commonly used consumables and accessories are listed in Table 3
Table 3: Consumables and Accessories for Model MPC-102A/102L
・ Compound detector
・ Specimen Cup with Reflex Seal
・ Reflex Seal
・ Pressure Conducting Tube
・ O-Ring G-35 (cooling bath flange)
・ O-Ring P-8 (to secure pressure conducting
tube)
For details on replacing consumables, refer to the Maintenance Manual.