- 27 -
7. Data Storage Functionality
This instrument has the capacity to automatically store the results of the last 50 tests.
To access the results history, press and release the RESET key while holding down the MODE key.
The Test History Screen shown in Fig. 19 is displayed.
The most recent test results are always shown as data No.1, with data id numbers in increments of
one. Data recorded more than 50 test runs ago is discarded. Result sets can be scrolled through by
pressing the up and down arrow keys.
No.1 DATE:03/02/13 11:15
Sample: UVWXYZ
MODE:PP/CP , L,1.0
PP:-28.0 CP:-10.0
No.30 DATE:02/12/12 16:24
Sample: AAAAAA
MODE:PP ,UH,3.0
PP:- 6.0 CP:
Fig. 19 Test History Screen
If the optional clock card is not installed, the date and time fields will all show 01/01/01 01:01.
The specimen name field always shows a value, even when specimen name input is disabled. (In this
case AAAAAA will typically be displayed as it is the default value).
If the optional printer is connected, pressing the FUNCTION key will print the entire test history.
Oldest data
Latest data
To Next Page
Loading...
Need help?
General
