- 13 -
4. Routine Daily Inspection
The following should be checked routinely before using the instrument:
Table 1 Checklist
Item Check that…
Appearance
Coolant piping
(MPC-102L Only)
Electrical
connections
Operation
・ Housing, cables, hoses, etc. are undamaged
・ All coolant hoses are free of leaks and other damage
・ Each connection is securely fastened
・ There are no indications of coolant leakage
・ Coolant hoses are fully insulated with the insulation pipe
・ All power cords and cables are free of damage
・ The power plug is fully inserted into the outlet
・ The grounding cable is properly connected (only applicable if
using the ground adapter)
(After turning the main power on…)
・ The display appears to be functioning correctly
・ Control panel keys respond appropriately when pressed
・ The Expected pour point has been correctly entered
!
Warning: Do not attempt to repair the instrument yourself. In the
event that the instrument exhibits any abnormal behavior
whatsoever, contact Tanaka Scientific Limited or an
authorized distributor.
To Next Page
Loading...