Operation
Manual
logon
1.
Enter terminal mode from the TELECOM-STATUS screen
(
(F5)
).
2.
At the TERMINAL MODE screen, press
@
and type in the telephone
number of the information service, then press
(ENTER)
.
3.
After the connection has been made successfully, proceed with the logon
procedures step by step.
Automatic
logon
1.
At the TELECOM-STATUS screen, press
(F4)
to create an autolog file
and enter your log file name, then press
(ENTER)
.
Press
(F1)
to
create
the STATUS line. After selecting the parameters, press
(F12j
to return
to the original screen and complete the rest of file. When completed,
the screen for your autolog file might show:
STATUS:
Y,
3098,
N,
1,
ON,
OFF,OFF,
OFF,
O
CALL:
123-4567
(Use
your
local
TELENET
number.)
PAUSE:
5
SEND:
*MAM
RECV:
TERMINAL
=
SEND:
DlAM
RECV:
@
SEND:
C
60942^M
RECV
:
????
SEND:
DJNS*M
2.
Press
(F12)
(ENTER)
to save this autolog file and return to the
TELECOM-STATUS screen.
3.
Input
(F3)
filename
(ENTER)
to execute your autolog file. When the
logon sequence is entered correctly, the Modem will dial your local ac-
cess number, connect to the service, then automatically execute the rest
of the autolog file.
24
To Next Page
Loading...
Need help?
General
