Tascam DP-004 - Protecting Songs

5–Song Management
TASCAM DP-004 53
7 Press the F3 ( YES ) key. After the songs are erased,
the SONG menu screen reopens.
To cancel erasing a song, press the
•
F4 ( NO ) key
instead of the F3 ( YES ) key.
Every MTR partition must always have at least one
•
song, so if you erase all the songs on a partition, a
new song is created automatically.
Protecting songs
If you protect a song, editing, recording, and erasing
of that song is prohibited.
1 When the transport is stopped and the Home
Screen is open, press the MENU key to open the
MENU screen.
2 Turn the DATA wheel to select SONG , and press the F4
(¥) key to open the SONG menu screen.
3 Turn the DATA wheel to select PROTECT , and press the
F4 (¥) key.
The SONG PROTECT screen that allows you to turn
protection of a song ON and OFF appears.
4 Turn the DATA wheel to turn PROTECT “ ON ,” and
press the F2 ( EXEC ) key.
After protection is turned ON, the SONG menu
screen reopens.
When the song list used to copy, erase and conduct
•
other functions is open, a lock icon appears next to
protected songs.
If you try to execute a prohibited operation
•
(edit, record, erase) on a protected song, “ Song
Protected ” appears and the operation is prevented.
To remove protection from a song, follow the above
•
procedures but set PROTECT to “ OFF ” in step 4.