Maintenance, Service, and Repair
Brakes Page 5
ADJUST THE SERVICE BRAKES, B 2-10
Two or Four Wheel Hydraulic Disc Brakes
The hydraulic disc brake system is automatically adjusted. A low brake pedal or lack of braking power
could be caused by:
• Brake fluid level low in the master cylinder. See Check the Master Cylinder Fluid section.
• Air in the brake lines. See Bleed the Brakes section.
• Worn brake pads. See Inspect the Service Brake section.
• Worn brake rotor. See Inspect the Service Brake section.
• Binding brake pedal linkage.
If you are experiencing a low brake pedal or lack of braking power, the entire brake system should be
inspected.
Refer to Replace the Master Cylinder section for information regarding adjusting the master cylinder
push rod.
To Next Page
Loading...
