2
1
1
ES_EN_
Place input
tube
Place lid
4
.5
4
.6
5
.1
5
.3
5
.2
5
.4
• Lubricate and assemble piston joints (X)
• Insert the piston (X) in its slot.
• Place the handle (A) in the body of the tap and
insert the bolt (D) through the hole.
• Place the seal (C) of the bolt (D).
• Lubricate and place the seal in the rear part of
the tap.
• Place the tap nozzle (E).
Tap
Assembly
Tap
assembly
Disinfect
machine
Rinse
Fill the bowl with 3 litres of disin-
fectant. Push the cleaning button
once and wait 15 minutes.
Empty cylinder and
repeat anterior pro-
cess substituting the
disinfectant for water.
Wait 1 minute.
Do at least 2 rinses.
X
A
D
E
C
21
To Next Page
Loading...
Need help?
General
