Taylor 161 SOFT - Surface Cleaning Procedures; Cleaning the Tap Area; Cleaning External Components

_ES_EN
CLEANING PROCESS:
(Before starting the cleaning process, the machine must be in STOP)
Especially the area of product
Dismantle tray. Wash
with warm water.
Clean drainage pipe.
Assemble tray again.
Eliminate dust and dirt and position it in the ma-
chine again.
1
.3
1
.1
1
.4
1
.2
Clean front
panel
Clean tap
Clean drip tray
Clean
DISINFECTANT
SPRAY
WET BRUSH WITH
DISINFECTANT
CLOTH WET WITH
DISINFECTANT
Surface cleaning
is recommended every day after making the last ice-cream.
24h
7.3 Surface cleaning
7.Cleaning
22