7-2
OPERATOR CHECKLIST
Model 428
Operator Checklist
7
Winter Storage
If the place of business is to be closed during the winter
months, it is important to protect the freezer by following
certain precautions, particularly if the building is to be left
unheated and subject to freezing conditions. Disconnect
the freezer from the main power source to prevent
possible electrical damage. Your local Taylor distributor
can perform this service for you.
Wrap detachable parts of the freezer (such as beater,
blades, driveshaft, and freezer door) and place in a
protected dry place. Rubber trim parts and gaskets can
be protected by wrapping with moisture-proof paper. All
parts should be thoroughly cleaned of dried mix or
lubrication accumulations, which can attract mice and
other vermin.
To Next Page
Loading...
