Taylor 428 - Page 37

Section 9
9-1
Model 428
Parts Replacement Schedule
9
Parts Replacement Schedule
Table 9-1
Part Description Every 3 Months Every 6 Months Annually
Quantities to
Be Replaced
Driveshaft Seal X 1
Driveshaft O-ring X 1
Scraper Blade X 1
Freezer Door Gasket X 1
Front Bearing X 1
Guide Bearing X 1
Draw Valve O-rings X 2
Black Bristle Brush—1” x 2” Inspect and replace if
necessary.
Minimum 1
White Bristle Brush—3” x 7” Inspect and replace if
necessary.
Minimum 1
White Bristle Brush—1” X 2” X 17” Inspect and replace if
necessary.
Minimum 1
Double-Ended Brush Inspect and replace if
necessary.
Minimum 1
Syrup Port Brush Inspect and replace if
necessary.
Minimum 1
White Bristle Brush—1-1/2” x 2” Inspect and replace if
necessary.
Minimum 1