32
Model C300Important: Operator Checklist
Winter Storage
If the place of business is to be closed during the
winter months, it is important to protect the freezer
by following certain precautions, particularly if the
building is subject to freezing conditions.
Disconnect the freezer from the main power source
to prevent possible electrical damage.
Your local Taylor Distributor can perform this service
for you.
Wrap detachable parts of the freezer such as the
beater, the scraper blades, the drive shaft, and the
freezer door. Place these parts in a protected, dry
place. Rubber trim parts and gaskets can be
protected by wrapping them with moisture--proof
paper. All parts should be thoroughly cleaned of
dried mix or lubrication which attract mice and other
vermin.
Note: It is recommended that an authorized service
technician perform winter storage draining, to insure
all water has been removed. This will guard against
freezing and rupturing of the components.
To Next Page
Loading...
Need help?
General
