54
11. Rinse the upper and lower release sheets with a
separate sanitizer-soaked grill cloth. Wipe until the
grill cleaner residue has been fully removed. See
Figure-105.
Figure-105
12. Remove the release sheet locking clips and the
upper and lower release sheets. Wash and rinse the
clips in the three-compartment sink. If necessary,
soak them in a hot solution of SolidSense APSC to
remove carbon accumulation.
See Figure-106.
Figure-106
13. Place all release sheets flat on the release sheet
storage tray, clean side down. Do not fold, crease, or
place them on sharp objects. Do not clean the
release sheets in the three-compartment sink.
See
Figure-107.
Figure-107
14. Spray a clean, sanitizer-soaked grill cloth once with
grill cleaner. Wipe the soiled side of the release sheet
until clean.
See Figure-108.
Figure-108
15. Rinse with a separate clean, sanitizer-soaked grill
cloth to rinse off the remaining grill cleaner. Repeat
for all of the release sheets.
See Figure-109.
Figure-109
16. Spray the upper platens with grill cleaner, starting
with the sides and back. If you have three upper
platens, lower the middle platen first to easily access
the adjoining sides of the right and left platens.
17. After spraying the sides, spray the surface of each
upper platen three times to cover the bottom, middle,
and top.
See Figure-110.