Energier Apollo User Manual
6
Energier Apollo inverter can be used in multiple applications. With a simple setting, you can compose
a power backup or solar off grid system. Its distinguishing surge capability makes it capable to power
most demanding appliances, such as fridge, freezer, water pump and air conditioner etc.
The AC distribution consists of two AC outputs for load management, AC output 1 is protected by
circuit breaker, and AC output 2 is controlled by the AC input: it will switch on only when AC is available.
Energier Apollo has some distinguished features designed especially for African, Middle East and
South East Asian countries where the grid is not stable and low voltage is frequently encountered.
Energier Apollo can maximize the usage of grid and automatically adjust its charging in accordance
with the setting.
Energier Apollo series consists of matrix LCD display function, user can monitor Energier Apollo
operation status on LCD interface, also user can use LCD interface to reset system configurations.
The product is easy to install, with a minimum of wiring.
Energier Apollo is a powerful all-in-one inverter integrated multiple functions, including a high
performance true sine wave inverter, a powerful battery charger, a MPPT solar charge controller, a
high speed automatic transfer switch and AC distribution in one enclosure.
The AC distribution consists of two AC outputs for load management, AC output 1 is protected by
AC input circuit breaker, and AC output 2 is controlled by the AC input circuit breaker.
AC output1 is available either bypass or inverter mode. AC output 2 is available only when AC is
present and the AC input switch has been switched on.
2.1 General description
AC
DC
DC
DC
CB1
AC Input
CB2
AC Output1
AC Output2
Charger / Inverter
MPPT Charger
Battery Bank