Energier Apollo User Manual
9
Through the LCD interface on the cover or through PC with Rapconfig, user can choose the capacity
of battery that you want to charge. According to your choice, Energier Apollo will automatically
adjust its output power makes it suitable the battery capacity selected. The charging current is set
at threshold rate of 15% of battery capacity(I=0.15C). And at threshold rate of 30% of battery
capacity (I = 0.30C) being set for Lithium battery &Lead-carbon battery.
Charger capacity adjustable
Energier Apollo can be configured to charge Lithium battery and lead-carbon battery, and charging
parameter can be programmed through LCD interface and PC with Rapconfig software as well.
Over a period of time, the cells in the flooded and OPZS and traction batteries can develop uneven
chemical states. This will result in a weak cell which can reduce the overall capacity of battery in turn.
To improve the life and performance of these types of battery, Energier Apollo includes a manual
equalization program that can be used to equalize the battery if recommended by battery manufacturer.
For details, please refer to chapter 5.5 performing equalization charging.
This charging program can ONLY being applied to Flooded, traction, semi-traction batteries. As a
protection, the EQ mode will automatically disable if you select either AGM,GEL,LFP,lead-carbon
as battery type.
Commonly encountered lead acid battery chemicals include GM
,
GEL
,
LFP
,
flooded, lead-carbon,
traction, semi-traction. The voltage required for a proper charging of different battery varies. Energier
Apollo could offer premium charging for above commonly encountered battery categories, of which
you can set through LCD interface and Rapconfig software.
Lithium battery and lead-carbon battery charging
Multi battery chemical available
Manual Equalization
To Next Page
Loading...
Need help?
General
