Preparations
The find mode needs to be armed before it will take any action.
● Receiver only:
○ Power up receiver and transmitter and make sure they are connected to each other.
● Receiver with GPS:
○ Make all steps above and ensure the GPS is having a solid sat lock.
● Receiver with GPS and TBS CORE PRO:
○ Make all steps above and simulate a take off. This can be done throttle above 3A or
walking your receiver until you see the take off message on the OSD.
Simulating flight
The find mode is armed now and you need to simulate a flight. Just separate transmitter and receiver by
more than 50 meters.
To Next Page
Loading...
