TC Electronic Finalizer User Manual

MAIN PAGE Expander
Y-axis is output
level.
USER PAGE
EXPERT PAGE
Arrow direction indicates
whether the parameter value
has been increased or
decreased since last recall.
PAGES
- User page
- Expert page
- Cross-over frequency page
X-axis is input
level.
Expander
threshold
low/mid/high
Attack time
low/mid/high
Release
time
low/mid/high
Side chain / delay
This parameter inserts the indicated delay in
the main signal path.
The side chain will therefore be able to look
ahead on the input signal, enabling it to
respond faster to sudden signal changes.
This parameter is common for expander/com-
pressor/limiter.
Ratio
low/mid/high Use band select cursors to access
individual bands.
CROSS-OVER FREQUENCY PAGE
20

TC Electronic Finalizer Specifications

General

Bit Depth	24-bit
Type	Mastering Processor
Inputs	Analog XLR, Digital AES/EBU, S/PDIF
Outputs	Analog XLR, Digital AES/EBU, S/PDIF
Processing	EQ, Compression, Limiting, Stereo Enhance
Sample Rate	32 kHz, 44.1 kHz, 48 kHz