36
RESET PAGE
How to enter the Reset page:
Hold the BYPASS key pressed while powering up.
Move the marker using the MENU keys and press OK
to select reset type.
Load User Default
This will reset all system parameters back to a default setup made
by you (see Store User Def.). This reset will NOT delete the user
presets of the Finalizer.
Store User Def.
When you have a perfect setup of your Finalizer, you are able to
store this as your own default setup. This function is very useful,
for example when you have finished a special production and
want to go back to normal. When you have the perfect setup of
your Finalizer, simply select this parameter and press OK to store
your default settings.
The User Default includes all system parameters.
Set User Name
This function makes it possible to write your name and phone
number into the Finalizer. Press OK to access the user data menu.
Use the ADJUST wheel and the MENU keys to write your name
and phone number into the Finalizer. Press OK to accept. Your
name and phone number will be displayed during power-up.
Reset System Parameters
This will reset all system parameters back to the factory default.
This reset will NOT delete the user presets of the Finalizer.
Reset all Presets
This will clear all RAM presets.
Store and load your own
default settings
Enter User data page
Reset system parameters
Clear all user presets
Test Programs
Type your name here
and your phone number
Place cursor here
and press OK to
finalize session.
To Next Page
Loading...
Need help?
General
