TC Electronic Finalizer User Manual

24
MAIN PAGE Limiter
Expert mode on/off
Arrow direction indicates
whether the parameter value
has been increased or
decreased since last recall.
Limiter
threshold
low/mid/high
Bypass individual
limiter bands.
Clipping method
The clip function smoothly kills
any overshoot that might occur
after heavy compression or limit-
ing. The higher the percentage,
the softer the clip.
USER PAGE
EXPERT PAGE
CROSSOVER FREQUENCY PAGE
Attack
Times
low/mid/high
Release
Times
low/mid/high
Digital ceiling
This parameter
reduces the full
scale (0dB) signal
level on the output.
Side chain / Delay
(same as under
compressor /
expander)

TC Electronic Finalizer Specifications

General

Bit Depth	24-bit
Type	Mastering Processor
Inputs	Analog XLR, Digital AES/EBU, S/PDIF
Outputs	Analog XLR, Digital AES/EBU, S/PDIF
Processing	EQ, Compression, Limiting, Stereo Enhance
Sample Rate	32 kHz, 44.1 kHz, 48 kHz