30
banK and namInG dIsplay
Naming Presets
All user preset types - on Scene, Routing or Engine
level can be renamed.
Basic operation
3UHVVWKHName field. A keyboard will pop up.
7\SHLQWKHQHZQDPH
3UHVVEnter.
The preset is not stored when the keyboards Enter
key is pressed. Only the name is entered.
To store you MUST press the red Store key on the
Store page.
The previous accessed display will always be present
beneath the keyboard. Current Fader values will be
displayed and faders can be used to adjust parameter
values.
Library - Bank
Via the Library Archive page you can copy Scene,
Routing and Engine banks to and from a PCMCIA card
and to/from a folder on your computer if you are using
the TC Icon software Editor.
Basic Operation
%DQNFRS\LQJLVKDQGOHGDVDFRPSOHWH8VHUEDQN
transferal.
3UHVVScene, Routing or Engine to select preset bank
type.
6HOHFW³IURP´DQG³WR´GHSHQGLQJRQ\RXUFKRLFH
3UHVVCopy Bank.
Scene/Routing/Engine Banks
7R)URP%DQN)LOH
Scene, Routing or Engine banks can be backed up and
retrieved from a MS-DOS formatted PCMCIA or a file
location on a connected computer (when using the TC Icon
software editor).
Copy Bank
Press to activate copy function between the selected
%DQNV
Rename
Press to rename the selected bank via the Naming pop-up
display.
Delete
3UHVVWRFOHDUWKHVHOHFWHG%DQN<RXZLOOEHDVNHGWR
confirm your choice to avoid unintended deletion.
Using PCMCIA cards
To use a PCMCIA card with System 6000, the card must
be MS-DOS formatted. This is done from the Frame/
System/Card page.
$0%3&0&,$FDUGFDQKROG
1000 Engine presets in 10 banks of 100 presets
500 Routing presets in 10 banks of 50 presets
500 Scene presets in 10 banks of 50 presets
$N%3&0&,$FDUGFDQKROG
500 Engine presets in 5 banks of 100 presets
250 Routing presets in 5 banks of 50 presets
250 Scene presets in 5 banks of 50 presets
File Folder
Enter the path to a folder (or shared folder) on a computer
or server. Please read more about shared folders on the
HW/Installation section fo this manual.