TC-Helicon VoiceTone create User Manual

You can use two VoiceTone pedals in series. Generally,
VoiceTone Create should be the last device in the chain
before connecting to your PA.
Step 1:
Follow the Quick Start guide for both VoiceTone Pedals.
Step 2:
Instead of connecting your first VoiceTone pedal to the
PA, connect its mono output to the mic input on Create.
Step 3:
Connect the 2nd VoiceTone pedal, in this case Create to
the PA.
Step 4:
Set VoiceTone Create’s Input Knob fully left.
Step 5:
Use the first pedal’s Input Knob to set the microphone
gain.
11
Using Two VoiceTone Pedals

TC-Helicon VoiceTone create Specifications

General

Brand	TC-Helicon
Model	VoiceTone create
Category	Musical Instrument
Language	English