15
Standard Setup
The standard setup for VoiceTone Create couldn't be
easier - put Create between your microphone and your
microphone input on your sound system. In this
configuration the Right Output is not used. The Left
Output is a mono mix of effects and dry, based on the
setting of the Mix Knob.
Configuring Standard Setup:
1. Connect your microphone to Create's Mic Input.
2. Connect to your sound system as indicated: Left
Output to a mic input channel on your sound system.
3. Connect Create's power adapter to main power
and to the Power Input on Create.
Setup Configurations
The default for Create is stereo mode off (mono). If
the Stereo Light is on, press and hold Performance
Buttons 4 and 5 simultaneously until the Stereo Light
turns off.
NOTE:
To Next Page
Loading...
Need help?
General
