Teac E Series - Page 36

33
Menu system instruction
About
System information
1.Press p/q key to select "System information" option.
2.Press u or " " key to display system information.ENTER
Net Ready Information
1.Press p/q key to select "Net Ready Information" option.
2.Press u or " " key to display net ready information.ENTER
Software Update(USB)
When the TV need to be updated, please copy the new software to a USB memory device and
connect it to the USB port of the TV. Then perform the following steps:
1.Press p/q key to select “Software Update” option.
2.Press u or key to confirm.ENTER
3.Press “YES” to confirm again, the TV will update by USB. Please wait a few minutes and don’t turn
off the power, it will turn off automatically when updating is complete.
Note: Please check with Customer Service if an update is available.
Internet Update Check
This can update TV through Internet.