21
P8. Setting the Minimum Flow Temperature
1. Press or to select program 8:
2. Press to change display to:
3. Press or to change the temperature setting to that
required.
4. Press to confirm the program changes and return to main menu.
Setting a Minimum Flow Temperature is required to limit the effect of the
Compensation. The flow temperature will not fall below that set in the
Minimum Flow program ( - differential), even if the compensated flow
temperature is below this level.
The Minimum Flow Temperature should be chosen to meet heating criteria.
8 MIN FLOW TEMP
CURRENT 40
E
ENTER
RETURN
SELECT
P
PROGRAM
UP/DN TO CHANGE
CURRENT 40
RETURN
SELECT
To Next Page
Loading...
