23
P10. Setting the Mid Temperature
The Mid Temperature is used (if required) to set the flow temperature during
the period between the 1
st
Off Time and the 2
nd
On Time.
If a second On Period is not required, then set Frequency (P3) to Once.
1. Press or to select program 10:
10 MID TEMP
CURRENT 65
SELECT
RETURN
2. Press to change display to:
UP/DN TO CHANGE
CURRENT 65
P
PROGRAM
3. Press or to set the required temperature.
SELECT
RETURN
4. Press to confirm program changes and return to main menu.
E
ENTER
To Next Page
Loading...
