32
P18. Rotation (TEC 200 only)
Program 18 allows the TEC 200 to rotate the lead boiler every 24 hours.
When set to YES the lead boiler is changed at midnight i.e. boiler 1 leads one
day, and boiler 2 the next, then boiler 1 next etc etc.
When set to NO the boiler connected as boiler one will always be the lead
boiler.
1. Press or to select program 18:
2. Press to change display to:
3. Press or to set YES or NO.
4. Press to confirm program changes and return to main menu.
SELECT RETURN
18 ROTATION
CURRENT YES
UP/DN TO CHANGE
CURRENT NO
P
PROGRAM
E
ENTER
SELECT RETURN
To Next Page
Loading...
