24
P11. Setting the Night Temperature
The Night Temperature can be used in 2 ways:
1. To provide basic frost protection in conjunction with the frost
temperature (P12).
2. To provide night time economies on 24 hour systems by selecting
a lower flow temperature during the programmed off periods.
1. Press or to select program 11:
2. Press to change display to:
3. Press or to set the required temperature.
4. Press to confirm program changes and return to main menu.
RETURN
SELECT
11 NIGHT TEMP
CURRENT 35
P
PROGRAM
UP/DN TO CHANGE
CURRENT 35
RETURN
SELECT
E
ENTER
To Next Page
Loading...
