TEC 100 - P17: Temperature Sensor Calibration

30
P17. Calibration
Program 17 allows individual calibration of the Flow, Return and External
temperature sensors. Each sensor reading can be adjusted by -10ºC/+20ºC.
1. Press or to select program 17:
2. Press to change display to:
3. Press or to adjust the displayed temp (-10ºC/+20ºC).
SELECT RETURN
17 CALIBRATE
17 CALIBRATE
FLOW 60
P
PROGRAM
SELECT RETURN
4. Press to confirm program changes and display:
E
17 CALIBRATE
RETN 50
ENTER
5. Press or to adjust the displayed temp (-10ºC/+20ºC).
6. Press to confirm program changes and display:
SELECT RETURN
E
ENTER
17 CALIBRATE
EXTN 16