29
P16. Internal / External Optimisation
Program 16 allows the TEC 100/200 to utilise either Internal AND External
Optimisation or just External Optimisation.
Internal Optimisation requires the heating pump to be connected to the
Plant/Pump Relay as described on page 5.
To use both modes of Optimisation set to YES.
To use just External Optimisation set to NO.
1. Press or to select program 16:
2. Press to change display to:
3. Press or to set YES or NO.
4. Press to confirm program changes and return to main menu.
SELECT RETURN
16 INT&EXT OPTIM
CURRENT NO
UP/DN TO CHANGE
CURRENT NO
P
PROGRAM
E
ENTER
SELECT RETURN
To Next Page
Loading...
