tecan MIO2 - Operator; Key Operator

2 - 4 MIO2 Operating Manual, 394934, en, V3.0
2 - Safety
User Qualification
 and have read and understood the instructions in the Operating Manual.
Tecan recommends that the operator attends an operator training course. Please
ask the Tecan Customer Service about available courses. Refer to section
10 “Customer Support”,  10-1.
2.4.1 Operator
The operator (lab technician) works for the operating company.
Required Skills  No specific application or system knowledge
 Command of local languages
 Command of English is preferable
The operator has application software access rights allowing him to run methods
and perform system care.
2.4.2 Key Operator
The key operator (application specialist) supports the operating company or works
for the same company.
Required Skills  Extensive application knowledge
 Limited system knowledge
 Command of local languages
 Command of English
 In-depth knowledge of the corresponding software manual
Responsibilities  Instructing the operator
 Writing, running and validating methods
 Helping the operator to solve problems with the instrument