6 - Operation
Operating Elements
MIO2 Operating Manual, 394934, en, V3.0 6 - 1
6 Operation
Purpose of This
Chapter
This chapter explains the operating elements and possible operating modes. It
gives instructions on how to operate the MIO2 properly and safely.
6.1 Operating Elements
User Interface Display functions and controls are available in the software packages and user
interfaces on the PC. Depending on your application, refer to the relevant
separate documentation.
6.2 Display and Operating Elements
There are no display elements attached directly to the MIO2. The corresponding
data is displayed on the PC screen.
Operating
Modes
The MIO2 has following operating modes:
Incubating microplate
Shaking microplate (optional)
ATTENTION
Risk of vibrations. An unstable cabinets or instrument platform table may build up
strong vibrations.
Make sure the instrument platform is installed on a stable surface.
Decrease or increase shaking frequency to avoid vibrations.
To Next Page
Loading...