tecan MIO2 - Page 17

3 - Technical Data
Product Identification and Appendix Labels
MIO2 Operating Manual, 394934, en, V3.0 3 - 3
4 Slot MIO
Product
Identification
Label
The product identification label (A) provides the following instrument details Fig. 3-
2,  3-2:
Calibration
Label
The calibration label (B) states the temperature the MIO2 was calibrated and
tested for Fig. 3-2,  3-2.
Configuration
Label
The configuration label (C) Fig. 3-2,  3-2 specifies the resistance of the slots.
Fig. 3-3 MIO2, 4 positions, product identification and appendix labels
Calibrated at XY °C
INCUBATOR MIO2 4-Slot XY°C
300YYYYY
24VDC
150W
T8AFuse
P
U,f
REF
Model
1001
SN
300YYYYY 1001
C
B
A
D
E
A Product identification label
B Calibration label
C Configuration label
D Monitored Incubator Option
E Caution label
Tab. 3-1 MIO2 product identification label
Note Definition
Identification data Model: Product name / model
REF: Reference number / Revision / Bar code
Manufacturing date
SN: Serial number
Technical data Voltage: supply voltage (Volts), 24 V DC
Power: power consumption (Watts) 150 W
Fuse: T8A 250V
Manufacturer’s name and address:
Tecan Schweiz AG, CH-8708 Männedorf
Barcode
Barcode: Serial number and product type