• Pre-Emphasis, selectable between 0, 25, 50, or 75 us
The Control section of the web interface screen allows the user to control functions inside the
equipment, including:
• Turn Carrier On/Off - Turn the Carrier on/off
• AGC - Increase the Carrier by removing attenuation (steps of 1 or 10 dB)
• VSWR ↑↓ - Increase or Decrease the VSWR Trip point by 0.1 between 1.1:1 and factory
determined limit.
• Frequency ↑↓ - Increase or Decrease the FM carrier frequency (MHz)
• Analog/Digital – Toggle between analog or digital audio inputs
• Mono/Stereo/MPX – Toggle between mono, stereo or MPX
• AES/TOSLINK/SPDIF – toggle between digital inputs
• Pre-Emphasis – Toggle between no added emphasis, or 25, 50, or 75 us emphasis
• Reset - Forces the system to reboot.
3. Optimize user parameters
Also on the main web Ethernet page, along the top, are links to the other user parameter pages:
• Main – Returns to Main Index page
• Network Configuration
• SNMP Configuration
• Password Configuration
The following sections describe the user parameter pages in detail.
To Next Page
Loading...