6.2. Camera settings in WLAN mode
Login in the My Secure via the camera ID (or new registered account) and password.
. H.264/MPEG4 player
(better image quality)
. Sub-Stream Player
(Normal image quality)
. Close H.264/MPEG4
. Close Sub Stream
6.2.1. Groups
(1) Create a Group: Right click the camera ID and select “Create a group”. Enter a
name for the group in the pop-up interface.
(2) Delete a Group: Right click the group name and click "Delete group" to display the
pop-up box.
(3) Add the camera to the appropriate group: Select the camera ID, hold down the
left button to drag the camera to the group, and then release the left mouse button.
6.2.2. Change Access password
After successfully login in, right-click on
camera ID, select “Change access code”,
as shown:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
