Technaxx TX-23 User Manual

(1) Before installation, make sure your phone is using 3G or WIFI
(2) Install software: Search and Install “My Secure”
in Apple APP store and Google play store.
(3) Click the APP icon to run the mobile APP
(4) Input the camera ID and password to Login camera
The Plug2View icon (see below) you can find on the LOGIN screen right
hand side (see the picture of the LOGIN screen). Also support click this
icon to scan QR-code to auto input ID and password. Then check the
camera label and input ID and password on the APP

Technaxx TX-23 Specifications

General

Type	IP security camera
PTZ control	No
Alarm input/output	Yes
Placement supported	Indoor
Connectivity technology	Wired & Wireless
Form factor	Dome
Mounting type	Ceiling/wall
Product color	Black
Maximum resolution	- pixels
Supported video modes	-
Video formats supported	M-JPEG
Angle of rotation	355 °
Minimum illumination	0.5 lx
Sensor type	CMOS
Optical sensor size	1/4 \
Optical zoom	- x
LED type	IR
Night vision distance	10 m
Number of illumination LEDs	10
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology	10/100Base-T(X)
Supported network protocols	TCP / IP
Ethernet LAN (RJ-45) ports	1
Audio formats supported	ADPCM
DC output current	2 A
Power consumption (typical)	4 W
Operating temperature (T-T)	-5 - 55 °C
Minimum RAM	1024 MB
Cables included	LAN (RJ-45)

Weight and Dimensions

Depth	110 mm
Width	100 mm
Height	130 mm
Weight	282 g