1/8/2018 Proprietary and Confidential - Technicolor 65
7.5.1.5 Auto,Learned,Device,
Auto learned devices are the Wi-Fi clients that are discovered by the gateway. The user can add
them to the MAC control list by selecting the add option in the screen.
7.5.2 SNMP Provisioning for MAC Control
tchRgDot11BssAccessMode enables/disables MAC Control and specifies the access
restriction mode. Note that in a dual-band concurrent model, the primary SSIDs of both first and
second radios share the object with the instance 32.
tchRgDot11ClientStation shows the MAC address of each connected wireless client.
7.6 WPS
Wi-Fi Protected Setup (previously called Wi-Fi Simple Config) is an optional certification program
developed by the Wi-Fi Alliance designed to ease set up of security-enabled Wi-Fi networks at
home and small office environment. Wi-Fi Protected Setup supports methods (pushing a button
or entering a PIN into a wizard-type application)
The objective of this protocol is to make Gateways and Client’s device connectivity easy for
user.
Wireless Tab / WPS
Click on the Wireless tab, and then click on the WPS control tab. The page displays WPS setup
information. Here user can set and display WPS parameters including the Access Point PIN and
Connection Method (Push Button/ PIN Number).
Figure 7.12
7.6.1 User Provisioning for WPS
Wi-Fi Protected Setup (WPS):
User can change the WPS feature status in this option.
To Next Page
Loading...
Need help?
General
