Technics RS-DC10

Start playback.
The play indicator lights.
6 PLAY®
| >
Loading a DCC tape
Load the cassette tape on the cassette tray.
Position the cassette tape with
its slider toward the deck.
Load the tape with the
label side facing up.
Cassette tray
Temporarily stopping the playback
PAUSE
The play indicator flashes.
Press the play button to
resume playback.
DIOL Om E- elm ad [-W'18-(6),4
When the cassette tape has not been loaded properly, the
display shown below appears and the cassette tray opens
automatically. Check the direction in which the cassette
tape was loaded, load it correctly and then close the
cassette tray.
(CASSETTE BLOCKED)
Removing a cassette tape
OPEN/CLOSE
é
Stopping the playback
stop The play indicator goes off. _
Display of cassette tape information
What appears on the display will differ according to
the cassette tape which is to be played back.
Prerecorded DCC music tapes
Album title display
The track number and its play time may appear
instead.
How to use headphones
1 Reduce the volume level.
2 Connect the headphones to the headphones
jack and adjust the volume level.
DCC recording tapes with time information
recorded
Time display
DCC recording tapes without time information
recorded
Tape counter display
Avoid listening for prolonged periods of time to prevent
hearing damage.