Technics RS-DC10

x
Handy Playback Functions Provided by the Deck
Repeat mode selector button
3 14
Skipping to a particular track (skip play)
Provided that the start mark (see page 40) has been
written, the skip function will work even for tapes on
which the track numbers have not been written.
Skipping to the next track
(Forward skip play)
During playback:
Each time this button is
pressed, the tape jumps to
io the start of the next track,
and playback is resumed.
SKIP
Skipping to the previous track
(Reverse skip play)
During playback:
SKIP Each time this button is
presséd, the tape jumps to"
the start of the previous
track, and playback is
resumed.
In the stop mode:
Each time this button Is
sxe pressed, the tape jumps to
>> the start of the next track,
and the tape stops.
{n the stop mode:
skip Each time this button is
“pressed, the tape jumps to
the start of the previous
track, and the tape stops.
Displays in the skip mode
With a prerecorded DCC music tape:
The display shows the next track
number if the tape is skipped
ahead or the previous track
number if it is skipped back.
With a DCC tape whose track numbers are not
displayed:
if the tape is skipped ahead, the
number of times that the button is
pressed Is indicated with a
plus “+" sign.
If the tape is skipped back, the
number of tlmes that the button is
pressed Is Indicated with a
minus “—" sign.
The “TO” display is cleared when the number of tracks
involved exceeds 9.