Technics RS-DC10

AVatclaAa\e) elov-lecme)amiatcm Byis e)I-\V
Text information selector button
Counter reset button
Counter selector button
Display
Selecting the counter display Resetting the tape counter
Normally, the track The counter display is
number and amount of COUNTER. retumed to “O000”.
COUNTER play time elapsed are Reser
=r shown on the display. mr)
Each time the COUNTER
button is pressed, the
counter display changes in
the sequence shown in
the table below.
| Counter mode Description
@ Track no. The amount of play time that has
and amount | elapsed from the start of a track is
| of play time { indicated for each track.
elapsed
5 7 +
@ Track no. The time elapsed from the start of the ;
and amount | tape until the current recording or 4
of absolute playback positlon on the tape is
play time indicated in minutes/seconds. During
elapsed recording this time is automatically
recorded to enable the tape position
to be checked or a particular position
on the tape to be searched
accurately. The time is not displayed
if it was not written during recording.
i LES