Technics SA-EX 140 - Aiia ELEN a

QUARTZ LOCK)( STEREO)
i Wa
rt
Listening to radio broadcasts
- Preset tuning
Preseiting radio stations into the memory channels of this unit
makes selecting stations simple.
A total of 30 FM and AM stations can be preset.
Please remember this
If a new station is preset into a channel, the Slaton previously
entered in that channel will be erased.
Automatic memory presetting
Automatic memory presetting allows this unit to search for stations
and then preset them into memory.
With this method, the channels that can be preset into the memory
are set as follows for different bands (FM or AM).
When FM stations are iati
For FM stations .. ee reiii aAA
When FM and AM stations a are e preset,
For FM stations si cisssisciavccstecasastncsdconcaadacpsiinsuesvoabessvanvecseounsantecsse 1—20
FOrAM Stát siipra a N 21-30
Set to the frequency from which you want to start
automatic memory presetting. (See page 10.)
Press [MEMORY] until the frequency begins to
f change.
(Automatic memory presetting will start.)
During automatic memory presetting, the memory indicator
will flash while the frequency scrolls. _
To stop, press [MEMORY] once again.
When a broadcast station is preset EJ al:
The memory indicator and the preset channel number will be dis-
played for approximately 1 second.
When presetting is completed
The last station to be preset will be displayed.
Frequencies may not be preset correctly in cases where the broad-
cast waves are too strong or too weak. In such cases, carry out pre-
setting manually. (See page 12) .
>
Operations =
RQT5221