AInstallation
D
Ref. DCD01/3078 - TD412_en_C
27/62
To use the CCU, 6 connections must be performed, in the following order:
• optical fiber: connection to the laser diode
• head/CCU connecting cable (17-19 point connector)
• SubD9 points for RS232 link
• 37 point connector (with jumpers)
• RF cord for module/CCU connection
• power supply
Connection of the optical fiber
1 : Side(s) (x2)
2 : Cover
3 : Strain relief with pigtail
4 : Optical fiber
5 : Protection cap(s) (optical fiber)
6 : Laser diode
7 : Protection cap(s) (laser diode)
To Next Page
Loading...
Need help?
General