Technify Motors CD-155 User Manual

Operation & Maintenance Manual
CD-135 / CD-155
OM-02-02
Chapter:
Issue:
Issue date:
Page:
Content:
02-OM-06-02
4
30.07.2014
54
74
Revision no.:
Revision date:
7
20.07.2016
4. Remount the oil drain plug with a new sealing ring and
tighten it to the specified tightening torque.
Tightening Torque:
25 Nm
5. Loosen the filter cap of the gearbox oil filter an remove it.
See Fig. 6.43.
6. Remove the oil filter with a M6 screw. See Fig. 6.44.
 CAUTION: The sealing ring has 2 different sealing surfaces.
The plane surface of the sealing ring must face the magnet.
Fig. 6.43 oil drain plug with sealing ring
a plane surface of the sealing ring
b sealing ring
c sealing surface with edge
d magnet
a
b
c
d
 Note: The used gearbox oil filter must be labeled, stored in a clean
container and made available to Technify Motors GmbH on
request for the complete engine life time. The label must show
the aircraft serial number, registration number, engine serial
number, operation time and date.

Technify Motors CD-155 Specifications

General

Brand	Technify Motors
Model	CD-155
Category	Engine
Language	English