CONNECTIONS
CONNECTING A PC
Connect the 15-pin D-SUB PC/VGA connector
fromyourcomputertothe15-pinD-SUBPC/VGA
input on this unit using a monitor cable and stereo
audio cable (not included) as shown.
Make sure you connect the cable from the
computer (PC Connector and PC AUDIO OUT) to
thisunit(MONITOR/VGAandAUDIO-PCIN).
To operate the connected PC, first press the
FUNCTION button to select the PC mode.
DOLBY DIGITAL (FOR DVD)
Dolby Digital is a sound system developed by Dolby Laboratories Inc. This unit automatically
recognizes DVDs that have been recorded with Dolby Digital.
Not all Dolby Digital sources are recorded with 6 channels.
Some sources marked Dolby Digital may be recorded in Dolby Surround, a 2 channel system.
Look for this logo on your unit.
Manufactured under license from Dolby Laboratories.
‘Dolby’andthedouble-D symbol are trademarks of Dolby Laboratories.
SOUND SYSTEM
•Turndownthevolumebeforeconnecting
headphones totheunit, then adjust the
volume to your desired level.
•When headphones are connected, no
sound will come from the front speakers.
Note:
• Avoid listening to sound at high levels
for prolonged periods of time. This
may be harmful to you and may cause
hearing loss.
Earphones / Headphones
(1/8” [3.5mm] diameter plug)
USING HEADPHONES
To Next Page
Loading...
