22
CD/DVD OPERATION
This owner’s manual explains the basic instructions of this unit. Some DVDs are produced
with limited operation during playback. For example, many DVDs do not allow users to skip
government warnings, or in some cases previews or other features. This is not a defect in the
unit. Refer to the instruction notes of discs.
“ ” may appear on the screen during operation. A “ ” means that the desired operation is
not permitted by the unit or disc.
PLAYING A DISC
1. Press the / I button to turn the unit on.
2. Press the FUNCTION button repeatedly to select DVD mode or directly to press DVD button on
the remote.
See CUSTOMIZING THE FUNCTION SETTINGS before proceeding to step 3.
3. Press the PUSH OPEN button to open the disc door.
4. Hold the disc by its edge and gently push it onto the spindle, with the label side facing the front,
until you hear a “click”.
5. Push the disc tray to close the disc door.
It takes a short while for your unit to load the disc. After loading, the unit will automatically
either bring you to the main menu of DVD, or start playing the DVD. If the unit does not
automatically start playing the DVD, press the PLAY button.
PLAYING A PICTURE FILE DISC
ThisunitcanplayJPGpicturelesrecordedonCD-RandCD-RWdiscs.
1. Press the PUSH OPEN button to open the disc door.
2. Hold the disc by its edge and gently push it onto the spindle, with the label side facing the front,
until you hear a “click”.
3. Push the disc tray to close the disc door.
4. Press the STOP button to go to the folder list.
5. Press the or button to highlight a file to play. Press the PLAY button to start playback.
Note:
• Youcanpressthe PAUSE button to interrupt playback, and press the PLAY button to
resume playback.
• YoualsocanusetheGOTO function or use the numbered buttons to enter the image number to
quickly select any image.
• PresstheANGLEbuttonontheremotecontroltorotatethepictureorientationby90°.
PAUSING PLAYBACK (STILL MODE)
Press the PAUSE button. To resume normal playback, press the PLAY button. Each time you
press the PAUSE button, the picture advances one frame.
STOPPING PLAYBACK
Press the STOP button at the location where you want to interrupt playback. To resume playback
at the position where the disc was stopped, press the PLAY button.
If you press the STOP button twice, the unit’s memory will be cleared and pressing the PLAY
button will reset the disc to the beginning.
SKIP (FORWARD / REVERSE)
•Pressthe PREV button to go back to previous chapters/tracks.
• Pressthe NEXT button to advance chapters/tracks.
• ForaudioCDdisc,usethenumberbuttons(remotecontrolonly)tojumpstraighttothattrack
number.
To Next Page
Loading...
Need help?
General
