Section IV – Diagrams
Figure 19. Additive Injector Communications
Note: For wiring from the Multi-drop Card to the Additive System refer to the manufacturer’s manual.
Table 9. Wiring Termination for T-568B and T-568A
Color Code Abbreviation T-568B Pin T-568A Pin
white w/orange stripe wht/org 1
orange org 2 6
white w/ green stripe wht/grn 1
blue blu 4 4
white w/ blue stripe wht/blu 5 5
green grn 6 2
white w/brown stripe wht/brn 7 7
brown brn 8 8
To Next Page
Loading...