EasyManuals Logo

TechniSat DigiCorder HD series User Manual

TechniSat DigiCorder HD series
352 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
22
Display control
To avoid the need to switch on the television set when navigating the MP3
playback, the latter can be controlled via the display. An MP3 le is shown on
the display with its respective lename. A folder will be indicated by a display
of square brackets, e.g. [Popmusic]. The hard drive will be displayed as hard
drive and a USB device will be indicated as USB-device1, USB-device2 etc..
> While the device is in standby mode, press the language selection
button. The device now switches itself on and automatically sets the
navigator to the music category.
> Use the arrow keys up/down to select the source from which you wish to
play back the MP3 les, and con rm by pressing OK. If no USB device
is connected to the system, only the internal hard drive of the receiver
will be available as a source.
> Now, rst use the arrow keys up/down to select the folder containing the
desired MP3 le, and con rm by pressing OK.
> Use the arrow keys up/down to select from the list the MP3 le you wish
to play rst, and con rm by pressing OK. The le selected will now be
played. Thereafter the other les located on the same source medium
will be played automatically.
Playback/reproduction of pictures
You can use your receiver to display created images, as well as les, which are
saved in JPG format on the hard disk or on a device connected via the USB
socket. The USB device should be formatted using the le system FAT 32.
> During normal operation, press the green function key to open the PVR
navigator.
> Press the red function key Category to open an additional window.
> Use the arrow keys up/down to highlight the line Pictures and con rm by
pressing OK.
> Use the arrow keys up/down to select the source from which you wish
to view the picture les, and con rm by pressing OK. A list showing
the picture les available on the hard drive and the USB device will be
displayed.
> Use the arrow keys up/down as applicable to initially highlight the folder,
which contains the desired image le, and con rm by pressing OK.
> Use the arrow keys up/down to select from the list of JPG les, which
you which to view and con rm with OK. The picture selected will now be
displayed in large format.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TechniSat DigiCorder HD series and is the answer not in the manual?

TechniSat DigiCorder HD series Specifications

General IconGeneral
BrandTechniSat
ModelDigiCorder HD series
CategoryReceiver
LanguageEnglish

Related product manuals